NPK blending fertilizer production line equipment needs to use lubricating oil, how to choose lubricating oil? bestfertilizermachine.com

1, npk blending fertilizer production line equipment with lubricating oil lubrication, pay attention to the temperature of the lubricating oil, because the lubrication is too high or too low will affect the lubrication effect, in serious cases, will cause equipment failure. It is recommended that the oil temperature of the lubricating oil be kept in the range of 30-40 degrees, and it is not allowed to work under the condition that the oil temperature is higher than 60 degrees and lower than 16 degrees, so that the equipment can run better.

2, due to the working nature of npk blending machine is relatively bad, so in the use of the time to pay attention to the tightness of the lubricating oil, strengthen the tightness of the lubricating oil, to prevent dust falling into the oil to affect the use of. Lubrication action. At the same time, the equipment itself strengthens the sealing work, such as the device sealing element and the vacuum cleaner and other components, to prevent dust from entering the lubricating oil.

Precautions for selecting lubricating oil for npk bulk blending machine:

1, when choosing npk blending machine lubrication, first of all, pay attention to choosing the lubricating oil suitable for the type of machine. You should pay attention to compare the performance and efficacy of each lubricant and choose the type that is suitable for your machine. Don’t buy blindly.

2, the selection should pay attention to the lubricating oil is economic, has a large cost-effective, in the premise of excellent lubrication effect, as far as possible to increase profits.