How to maintain a pool after the Dubai sandstorm
The beauty of Dubai is undeniable, but sandstorms can wreak havoc in your sparkling oasis – your pool. These high wind events can leave behind a layer of fine sand and turn your once inviting pool into a rough mess. But fear not, fellow pool owners! With the right approach, including regular pool maintenance you can restore your pool to its original condition in no time.
Damage Assessment
After a sandstorm, take a moment to assess the situation. Here’s what to look for:
- Sand Accumulation: The most obvious sign will be a layer of sand settling on the bottom of your pool and potentially sticking to the walls.
- Water Clarity: Once the water is clear, it will likely appear cloudy or murky due to suspended sand particles.
- Filter pressure: A clogged filter due to trapped sand can cause an increase in filter pressure.
Measures: A step-by-step guide
Now that you’ve assessed the damage, it’s time to roll up your sleeves and get to work. Here’s a step-by-step guide on how to effectively clean your pool after a sandstorm:
- Run the pool pump continuously: This is the first line of defense. Let your pool pump circulate the water for a few hours. This continuous flow will help loosen the deposited sand and allow the filter to capture the particles.
- Manual Cleaning: Grab the pool net and skimmer to remove any large debris such as leaves, twigs or excessive sand piles floating on the surface.
- Filter Flushing: After the pump has been circulating for several hours, it is important to flush the filter. This process reverses the flow of water through the filter and washes out the trapped sand. Refer to the instructions for the specific filter for proper backwashing instructions.
- Wall and floor cleaning: Use a pool brush specifically designed for your pool surface material (concrete, fiberglass, etc.). Brushing will loosen any clinging sand particles and allow the water to circulate and carry them towards the filter.
- Pool vacuuming: A pool vacuum is a powerful tool for vacuuming accumulated sand from the bottom of your pool. Many pool vacuums connect directly to your skimmer line and use pump suction to remove debris. For optimal results, move the vacuum head slowly and methodically along the bottom of the pool.
- Cleaning the filter media: After a thorough backwash, check the filter media (cassette, sand or DE) for sand residue. If heavily fouled, it may be necessary to replace the cartridge or clean the sand/DE media according to the manufacturer’s instructions.
- Checking and Adjusting Chemical Levels: Sandstorms can sometimes disrupt the chemical balance of your pool. Use the pool test kit to measure chlorine, pH and stabilizer levels. Adjust chemicals as needed to ensure proper pool hygiene and water clarity.
- Rinse and repeat: After completing the cleaning process, it is advisable to rinse the surface of the pool and surrounding areas. Residual sand can be slippery and a safety hazard. If necessary, repeat steps 1-4 until the pool water reaches the desired clarity.
Professional tips for a quick recovery
Here are some other tips to speed up your pool recovery after a sandstorm:
- Use pool cleaner: Adding pool cleaner can help agglomerate fine sand particles so the filter can more easily capture them.
- Shock the Pool: If a sandstorm has stirred up settled debris, shocking your pool with chlorine can help remove lingering bacteria and ensure proper sanitation.
- Cover your pool when not in use: Investing in a pool cover can greatly reduce sand build-up during future sandstorms.
Conclusion
By following these steps and professional tips, you can effectively restore your pool to its sparkling glory after a sandstorm. Remember, acting quickly and following the correct pool cleaning services will minimize the impact of sand and ensure your pool remains a refreshing haven in the heart of Dubai.
Report Story